How To Clean Oven Fan Filter

Brandon has been working with range hoods and rang on and off for the past 6 years and writes about them to help people make wise decisions.

5 Reasons to Clean Your Range Hood Filters

Even though it may not seem like the best way to spend your time, you're going to want to make sure that your range hood filters are maintained well. Top manufacturers such as Broan recommend that you clean the filters at least once a month.

That's definitely a lot of cleaning if you're like every regular homeowner. Most people have never cleaned their filters in years, some even a decade. But, being a self-proclaimed expert on range hoods, I must second what the guys at Broan are telling you. Consistent cleaning of your filters is necessary for the following reasons:

Improved power efficiency.
Longer life of the blower.
Effective grease and smoke removal.
Easier cleaning.
Safety.

Regular Cleaning Makes Things Simple

After & before cleaning using just soapy water and ammonia.

Flickr Creative Commons

Can All Filters Be Cleaned?

There are basically three kinds of filters on most range hoods:

Fabric grease filters
Metallic grease filters
Charcoal filters

Grease filters, as the name suggests, have the sole purpose of filtering out oil fumes and grease. They are present in all range hoods with the exception of a few models in the past.

Fabric grease filters work by absorbing the fumes and grease (much like a sponge) and cannot be cleaned but need to be replaced.

Metallic grease filters can and must be cleaned often. They are usually aluminum or in some cases stainless steel. They would be either mesh filters or baffle filters and are usually visible at the base of your range hood.

Charcoal filters are only going to be present in ductless models as their main purpose is the elimination of odor and smoke. This is only a necessary step if you're recirculating the air back into your kitchen. These filters must not and cannot be cleaned. Instead, they need to be replaced every three to four months, depending on how often and what kind of dishes you prepare.

How to Clean a Range Hood Filter in 7 Simple Steps

It may seem like a long process, but depending on how dirty your range hood filters are and the method you choose to follow, the total time could be anywhere up to an hour, whereas the actual cleaning time would be below 15 minutes.

Detach the metallic grease filter(s)
Place the filter in a large pan/sink
Prepare the cleaning solution
Immerse the filters in the solution
Brush to remove the grease easily
Let them air dry
Insert them back into the range hood

Detaching the Filter to Be Cleaned

This is going to vary based on your model. However, in all models, the filters are very easy to detach. But before you start fidgeting and trying to figure out how to separate it from the rest of your hood, make sure that you switch off the appliance.

Spend a moment to take a look at the overall setup of the range hood. Are your metallic filters clearly visible or are they mostly hidden? The first step is to make sure that you have a clear view of the filters. Remove any protective plastic or metallic casing that surrounds the base of your hood using a screwdriver. In 95% of the cases, there isn't going to be any protective casing.

Once you have a clear view of the filters, you're going to want to find out how they are connected to the rest of the appliance. You would notice either one of the following:

Screws hold them in place and they need to be unscrewed.
A T-Lock or similar mechanism holds them in place.
A metal/plastic fastener that needs to be rotated to the side. (Video below)
Easy to operate latch mechanism where you press on the lever and raise to detach. (Video below)
Rim supports where you just need to push up and rotate to set the filter-free.

Fortunately, the most difficult type of attachment that you're going to come across is one with a combination of a support and a fastener. The only reason I say it's difficult is that there are models where the rotating flap is placed at such an awkward position, you're going to find it difficult to get your fingers in place. Instead, you may have to use a spoon or a screwdriver to rotate it.

Preparing the Cleaning Solution & Cleaning the Filters

We're now going to be covering step 3 to step 5 of the cleaning process. There will be no clear distinction between the steps as each of the five methods stands on its own and may skip certain steps.

Comparison: Method 2 vs. Method 3

Method 4: Hot Soapy Water + Ammonia

If you've been following your cleaning schedule and cleaning every other month, this simple method using just soapy water and ammonia (not always necessary) is all you're going to need.

Block the kitchen sink and add water + dish soap. You may also want to add some ammonia to make the job easier.
Mix the solution and then place the filter in.
Use a brush and scrub on the filter.

Cleaning a Range Hood Filter - the Broan NuTone Way

Method 5: Placing in the Dishwasher

Most modern day range hoods come with dishwasher friendly aluminum or stainless steel grease filters. You're going to need to look at the product specifications to find out if the filters are dishwasher friendly, alternatively, you could look up reviews of the product or contact customer support.

If your filters are dishwasher friendly, you should, by all means, make sure that you clean it every other month. Because, if you do this consistently, you're not going to have to worry about scrubbing and using special solutions to clean them.

However, if you've failed to regularly clean them, your filters may have accumulated a lot of grease and dirt. In this case, just placing them in the dishwasher is not going to do much. You will instead have to follow one of the first three methods explained above.

Air Drying and Reattachment

Since the filters are metallic, I would not recommend using a blow dryer as this could in unfortunate cases lead to electric shocks. Therefore, the best thing that you could do is allow them to dry in time. Before you set them back in place, make sure that they are completely dry as you don't want the wiring of the range hood getting wet by any chance.

Dirty Range Hoods Can Be Dangerous

A dirty range hood doesn't just damage the range hood and increase your electricity bill, it's also a health and fire hazard.

Health Hazards

A dirty range hood is greasy, slimy and warm. This is an environment where some pathogens (bacteria and the like) thrive. Also, the small food particles that are carried along with the fumes and settle on the filters help feed the growing bacteria.

Fire Hazards

The oil and grease deposits on your range hood, just above your cooktop are a fire hazard waiting to happen. It's not common that fires are caused this way, but there have been a few cases where uncontrolled flames on the stove have risen and ignited residues on the range hood filter.

Cleaning the Area Around the Filter

There are bound to be oil and grease deposits on certain parts of the range hood which are immediately above the cooktop and also around the grease filters. These areas can easily be cleaned using a mild degreaser.

All you need to do is use a napkin, spray some degreaser and wipe away. Make sure that you read the instructions before you spray, as some of them are concentrated and you need to mix with water before use.

This article is accurate and true to the best of the author's knowledge. Content is for informational or entertainment purposes only and does not substitute for personal counsel or professional advice in business, financial, legal, or technical matters.

Questions & Answers

Question: Can I clean range hood filters in the dishwasher?

Answer: If the manufacturer says you can, then you could. If you don't have those details use your own judgment. Are there small parts that could be damaged? If yes, do not put it in the dishwasher.

Brandon Lobo (author) on September 03, 2018:

Hey Marian, cleaning the fan. Hmm, it really depends on your range hood model. I would most likely use a damp cloth, soaked in some cleaning solution to wipe the blades. I would also advise against getting any electrical components wet. After cleaning the fan, as a precaution, I would suggest that you do not turn on the range hood for at least a few hours, allowing any moisture on the electrical connections to dry up. Do come back and let me know how it goes and what you decide to do. I would love to add to this article, and I'm sure it would help many readers in the future.

Marian Laureta on September 03, 2018:

Hi Brandon: thanks for your awesome write up. Cleaning the filters are no problem. The question I have is: do you recommend cleaning the actual fan? I have had difficulty finding info on this.

Brandon Lobo (author) on July 30, 2018:

Hi Carl, thanks for sharing. Glad that you managed to clean those filters.

Carl on July 29, 2018:

I cleaned my range hood filters last night. They were very greasy. First, I tried a strong ammonia solution -- no good. Then I tried a strong dish detergent solution -- no good. Finally, I tried a strong dishwasher detergent and very hot water solution -- worked!

Brandon Lobo (author) on April 02, 2018:

Very true.

Linda Bryen from United Kingdom on April 02, 2018:

Hi! Brandon, we do learn from each other here on Hubpages. That is what I like about the website too. Too many things to learn and share. Thanks.

Brandon Lobo (author) on April 02, 2018:

Hi Linda, white malt vinegar on burnt stuff, I should try that out. I try and use force or hot water to help. Thanks for the helpful tips.

Linda Bryen from United Kingdom on April 02, 2018:

Hi! Brandon, what a well written and informative hub. Thank you. What I find best for cleaning cooker hoods is the vinegar and baking soda combination and fairy liquid just to finish it off. Or sometimes I use the white spirit they use for thinning paint. I spray the cooker filter and leave it for an hour or so then I clean it with fairy liquid. I tried degreaser products but they don't seem to work, also very expensive. Vinegar and baking soda is the best cleaning agent for cooker filters I think, and not so expensive. I use white malt vinegar for burnt saucepans and baking trays. Just soak it with vinegar overnight and clean it the next day. The burnt stuff comes off easily.

Bigtexun on March 10, 2018:

So I took a lot of chemestry in school, and paid for that schooling with reseaurant work, including cleaning range hoods.

Don't dilute your degreaser if it comes in a spray bottle, it is already dilute. spritsing spray degreaser into a large amount of water is counterproductive. On the other hand, concentrated degreaser needs dilution with hot water to work. Industrial purple from Zep is similar to what the pros use.

If you use vinegar and baking soda, think about what you are doing. Vinegar is an acid, baking soda is a base, they cancel each other out and produce co2 and salt. co2 and salt are not useful. Basking soda is good to use dry or in paste form, for a variety of jobs. Vinegar is great for other jobs, expecially descaling. Mixing them together is deactivating both. So to follow the instructions here, what you are doing is cleaning the filters in a weak acis bath, that you make weaker as you add the baking soda. And in the process you are doing nothing for grease. Just because grandma used it doesn't make it work. Gradma cleaned things by scrubbing and scrubbing, the baking soda and vinegar did not actually help, only the hot water did, b ut grandma and dish soap did most of the actual work. The foaming action has the illusion of scrubbing bubbles... bubbles can help agitate, but they don't scrub and they don't really help with /this/ task.

A stong alkali in boiling water will work for a quality stainless alloy, turning the grease into soap, but that is dangerous for the skin and can produce fumes... But when grandma was serious about degreasing something hard to scrum, lye was her go-to degreaser... Turn that grease into soap then it just dissolves in water. The alkali will destroy aluminum, so industrial blue degreaser is the best for aluminum. Grandma used lye for a lot of serious cleaning, but it is not safe, so stick to the degreaser and dish soap.

If your sink is large enough to soak the filters, a good automatic dishwasher detergent is also good, this is what I use at home when I don't have industrial purple.Automatic dishwashing powder is great for soaking, and will help loosen and lift the soiled grease out of hard to scrub areas.

baking soda and vinegar together are for leavening old fashioned from-scratch cakes... THAT is where vinegar and baking soda chemistry actually does more than make a salt.

Brandon Lobo (author) on March 10, 2018:

Hi Colleen, maybe try finding something that fits in to those knob holes perfectly so that you have some leverage to get them out? You're going to have to improvise with something at home. Good luck.

Colleen on March 04, 2018:

Hi Brandon

I have a Faber hood with baffle filters. They are not installed properly so the knobs to remove baffles are not there. Is there a tool I can use to pull the baffle back enough to remove it! There are holes for the knobs but no knobs! Please help if u can!

Brandon Lobo (author) on January 28, 2018:

Thank you for this comment iSky, there was someone who was complaining that this is against high school chemistry, mixing an acid and a base. It works, the mixture of vinegar and baking soda.

iSky on January 28, 2018:

My filter was horrible. I soaked it overnight first using dish soap. Then for an hour with dishwasher soap. It was very clean but had a couple spots. Then used the vinegar and baking soda method. Came out sparkling clean.

Neil from SHEFFIELD on December 13, 2017:

In most cases I find the dishwasher works great for cleaning these extractor filters, just make sure they are fully dry before re-fitting otherwise corrosion can appear.